VoxeLibre/mods/MAPGEN/tsm_railcorridors/init.lua
2017-05-20 05:26:18 +02:00

584 lines
19 KiB
Lua
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

tsm_railcorridors = {}
-- Load node names
dofile(minetest.get_modpath(minetest.get_current_modname()).."/gameconfig.lua")
-- Settings
local setting
-- Probability function
-- TODO: Check if this is correct
local P = function (float)
return math.floor(32767 * float)
end
-- Wahrscheinlichkeit für jeden Chunk, solche Gänge mit Schienen zu bekommen
-- Probability for every newly generated chunk to get corridors
local probability_railcaves_in_chunk = P(0.3)
setting = tonumber(minetest.setting_get("tsm_railcorridors_probability_railcaves_in_chunk"))
if setting then
probability_railcaves_in_chunk = P(setting)
end
-- Innerhalb welcher Parameter soll sich die Pfadlänge bewegen? (Forks heben den Maximalwert auf)
-- Minimal and maximal value of path length (forks don't look up this value)
local way_min = 4;
local way_max = 7;
setting = tonumber(minetest.setting_get("tsm_railcorridors_way_min"))
if setting then
way_min = setting
end
setting = tonumber(minetest.setting_get("tsm_railcorridors_way_max"))
if setting then
way_max = setting
end
-- Wahrsch. für jeden geraden Teil eines Korridors, Fackeln zu bekommen
-- Probability for every horizontal part of a corridor to be with torches
local probability_torches_in_segment = P(0.5)
setting = tonumber(minetest.setting_get("tsm_railcorridors_probability_torches_in_segment"))
if setting then
probability_torches_in_segment = P(setting)
end
-- Wahrsch. für jeden Teil eines Korridors, nach oben oder nach unten zu gehen
-- Probability for every part of a corridor to go up or down
local probability_up_or_down = P(0.2)
setting = tonumber(minetest.setting_get("tsm_railcorridors_probability_up_or_down"))
if setting then
probability_up_or_down = P(setting)
end
-- Wahrscheinlichkeit für jeden Teil eines Korridors, sich zu verzweigen vorsicht, wenn fast jeder Gang sich verzweigt, kann der Algorithums unlösbar werden und MT hängt sich auf
-- Probability for every part of a corridor to fork caution, too high values may cause MT to hang on.
local probability_fork = P(0.04)
setting = tonumber(minetest.setting_get("tsm_railcorridors_probability_fork"))
if setting then
probability_fork = P(setting)
end
-- Wahrscheinlichkeit für jeden geraden Teil eines Korridors eine Kiste zu enthalten
-- Probability for every part of a corridor to contain a chest
local probability_chest = P(0.05)
setting = tonumber(minetest.setting_get("tsm_railcorridors_probability_chest"))
if setting then
probability_chest = P(setting)
end
-- Probability for a rail corridor system to be damaged
local probability_damage = P(1.0)
setting = tonumber(minetest.setting_get("tsm_railcorridors_probability_damage"))
if setting then
probability_damage = P(setting)
end
-- Max. and min. heights between rail corridors are generated
local height_min
if mcl_vars.mg_lava then
height_min = mcl_vars.mg_lava_overworld_max + 2
else
height_min = mcl_vars.mg_bedrock_overworld_max + 2
end
local height_max = mcl_util.layer_to_y(60)
-- Chaos Mode: If enabled, rail corridors don't stop generating when hitting obstacles
local chaos_mode = minetest.setting_getbool("tsm_railcorridors_chaos") or false
-- Parameter Ende
-- random generator
local pr
local pr_initialized = false
local function InitRandomizer(seed)
pr = PseudoRandom(seed)
pr_initialized = true
end
-- Checks if the mapgen is allowed to carve through this structure and only sets
-- the node if it is allowed. Does never build in liquids.
-- If check_above is true, don't build if the node above is attached (e.g. rail)
-- or a liquid.
local function SetNodeIfCanBuild(pos, node, check_above)
if check_above then
local abovename = minetest.get_node({x=pos.x,y=pos.y+1,z=pos.z}).name
local abovedef = minetest.registered_nodes[abovename]
if abovename == "unknown" or abovename == "ignore" or (abovedef.groups and abovedef.groups.attached_node) or abovedef.liquidtype ~= "none" then
return false
end
end
local name = minetest.get_node(pos).name
local def = minetest.registered_nodes[name]
if name ~= "unknown" and name ~= "ignore" and def.is_ground_content then
minetest.set_node(pos, node)
return true
else
return false
end
end
-- Tries to place a rail, taking the damage chance into account
local function PlaceRail(pos, damage_chance)
if damage_chance ~= nil and damage_chance > 0 then
local x = pr:next(0,100)
if x <= damage_chance then
return false
end
end
return SetNodeIfCanBuild(pos, {name=tsm_railcorridors.nodes.rail})
end
-- Returns true if the node as point can be considered “ground”, that is, a solid material
-- in which mine shafts can be built into, e.g. stone, but not air or water
local function IsGround(pos)
local nodename = minetest.get_node(pos).name
local nodedef = minetest.registered_nodes[nodename]
return nodename ~= "unknown" and nodename ~= "ignore" and nodedef.is_ground_content and nodedef.walkable and nodedef.liquidtype == "none"
end
-- Returns true if rails are allowed to be placed on top of this node
local function IsRailSurface(pos)
local nodename = minetest.get_node(pos).name
local nodedef = minetest.registered_nodes[nodename]
return nodename ~= "unknown" and nodename ~= "ignore" and nodedef.walkable and (nodedef.node_box == nil or nodedef.node_box.type == "regular")
end
-- Checks if the node is empty space which requires to be filled by a platform
local function NeedsPlatform(pos)
local node = minetest.get_node({x=pos.x,y=pos.y-1,z=pos.z})
local node2 = minetest.get_node({x=pos.x,y=pos.y-2,z=pos.z})
local nodedef = minetest.registered_nodes[node.name]
return node.name ~= "ignore" and node.name ~= "unknown" and nodedef.is_ground_content and ((nodedef.walkable == false and node2.name ~= tsm_railcorridors.nodes.dirt) or (nodedef.groups and nodedef.groups.falling_node))
end
-- Create a cube filled with the specified nodes
-- Specialties:
-- * Avoids floating rails for non-solid nodes like air
-- Returns true if all nodes could be set
-- Returns false if setting one or more nodes failed
local function Cube(p, radius, node)
local y_top = p.y+radius
local nodedef = minetest.registered_nodes[node.name]
local solid = nodedef.walkable and (nodedef.node_box == nil or nodedef.node_box.type == "regular") and nodedef.liquidtype == "none"
-- Check if all the nodes could be set
local built_all = true
for zi = p.z-radius, p.z+radius do
for yi = y_top, p.y-radius, -1 do
for xi = p.x-radius, p.x+radius do
local ok = false
if not solid and yi == y_top then
local topdef = minetest.registered_nodes[minetest.get_node({x=xi,y=yi+1,z=zi}).name]
if not (topdef.groups and topdef.groups.attached_node) and topdef.liquidtype == "none" then
ok = true
end
else
ok = true
end
local built = false
if ok then
built = SetNodeIfCanBuild({x=xi,y=yi,z=zi}, node)
end
if not built then
built_all = false
end
end
end
end
return built_all
end
local function Platform(p, radius, node)
for zi = p.z-radius, p.z+radius do
for xi = p.x-radius, p.x+radius do
local np = NeedsPlatform({x=xi,y=p.y,z=zi})
if np then
minetest.set_node({x=xi,y=p.y-1,z=zi}, node)
end
end
end
end
-- Random chest items
-- Zufälliger Kisteninhalt
-- chests
local function Place_Chest(pos, param2)
if SetNodeIfCanBuild(pos, {name=tsm_railcorridors.nodes.chest, param2=param2}) then
local meta = minetest.get_meta(pos)
local inv = meta:get_inventory()
local items = tsm_railcorridors.get_treasures(pr)
for i=1, math.min(#items, inv:get_size("main")) do
inv:set_stack("main", i, ItemStack(items[i]))
end
end
end
local function WoodBulk(pos, wood)
SetNodeIfCanBuild({x=pos.x+1, y=pos.y, z=pos.z+1}, {name=wood})
SetNodeIfCanBuild({x=pos.x-1, y=pos.y, z=pos.z+1}, {name=wood})
SetNodeIfCanBuild({x=pos.x+1, y=pos.y, z=pos.z-1}, {name=wood})
SetNodeIfCanBuild({x=pos.x-1, y=pos.y, z=pos.z-1}, {name=wood})
end
-- Gänge mit Schienen
-- Corridors with rails
-- Returns <success>, <segments>
-- success: true if corridor could be placed entirely
-- segments: Number of segments successfully placed
local function corridor_part(start_point, segment_vector, segment_count, wood, post, is_final)
local p = {x=start_point.x, y=start_point.y, z=start_point.z}
local torches = pr:next() < probability_torches_in_segment
local dir = {0, 0}
local torchdir = {1, 1}
local node_wood = {name=wood}
local node_fence = {name=post}
if segment_vector.x == 0 and segment_vector.z ~= 0 then
dir = {1, 0}
torchdir = {5, 4}
elseif segment_vector.x ~= 0 and segment_vector.z == 0 then
dir = {0, 1}
torchdir = {3, 2}
end
for segmentindex = 0, segment_count-1 do
local dug = Cube(p, 1, {name="air"})
if not chaos_mode and segmentindex > 0 and not dug then return false, segmentindex end
-- Add wooden platform, if neccessary. To avoid floating rails
if segment_vector.y == 0 then
Platform({x=p.x, y=p.y-1, z=p.z}, 1, node_wood)
end
-- Diese komischen Holz-Konstruktionen
-- These strange wood structs
if segmentindex % 2 == 1 and segment_vector.y == 0 then
local calc = {
p.x+dir[1], p.z+dir[2], -- X and Z, added by direction
p.x-dir[1], p.z-dir[2], -- subtracted
p.x+dir[2], p.z+dir[1], -- orthogonal
p.x-dir[2], p.z-dir[1], -- orthogonal, the other way
}
--[[ Shape:
WWW
P.P
PrP
pfp
W = wood
P = post (above floor level)
p = post (in floor level, only placed if no floor)
From previous generation (for reference):
f = floor
r = rail
. = air
]]
-- Don't place those wood structs below open air
if not (minetest.get_node({x=calc[1], y=p.y+2, z=calc[2]}).name == "air" and
minetest.get_node({x=calc[3], y=p.y+2, z=calc[4]}).name == "air" and
minetest.get_node({x=p.x, y=p.y+2, z=p.z}).name == "air") then
-- Left post and planks
local left_ok = true
left_ok = SetNodeIfCanBuild({x=calc[1], y=p.y-1, z=calc[2]}, node_fence)
if left_ok then left_ok = SetNodeIfCanBuild({x=calc[1], y=p.y , z=calc[2]}, node_fence) end
if left_ok then left_ok = SetNodeIfCanBuild({x=calc[1], y=p.y+1, z=calc[2]}, node_wood) end
-- Right post and planks
local right_ok = true
right_ok = SetNodeIfCanBuild({x=calc[3], y=p.y-1, z=calc[4]}, node_fence)
if right_ok then right_ok = SetNodeIfCanBuild({x=calc[3], y=p.y , z=calc[4]}, node_fence) end
if right_ok then right_ok = SetNodeIfCanBuild({x=calc[3], y=p.y+1, z=calc[4]}, node_wood) end
-- Middle planks
local top_planks_ok = false
if left_ok and right_ok then top_planks_ok = SetNodeIfCanBuild({x=p.x, y=p.y+1, z=p.z}, node_wood) end
if minetest.get_node({x=p.x,y=p.y-2,z=p.z}).name=="air" then
if left_ok then SetNodeIfCanBuild({x=calc[1], y=p.y-2, z=calc[2]}, node_fence) end
if right_ok then SetNodeIfCanBuild({x=calc[3], y=p.y-2, z=calc[4]}, node_fence) end
end
-- Torches on the middle planks
if torches and top_planks_ok then
-- Place torches at horizontal sides
SetNodeIfCanBuild({x=calc[5], y=p.y+1, z=calc[6]}, {name=tsm_railcorridors.nodes.torch_wall, param2=torchdir[1]}, true)
SetNodeIfCanBuild({x=calc[7], y=p.y+1, z=calc[8]}, {name=tsm_railcorridors.nodes.torch_wall, param2=torchdir[2]}, true)
end
elseif torches then
-- Try to build torches instead of the wood structs
local node = {name=tsm_railcorridors.nodes.torch_floor, param2=minetest.dir_to_wallmounted({x=0,y=-1,z=0})}
-- Try two different height levels
local pos1 = {x=calc[1], y=p.y-2, z=calc[2]}
local pos2 = {x=calc[3], y=p.y-2, z=calc[4]}
local nodedef1 = minetest.registered_nodes[minetest.get_node(pos1).name]
local nodedef2 = minetest.registered_nodes[minetest.get_node(pos2).name]
if nodedef1.walkable then
pos1.y = pos1.y + 1
end
SetNodeIfCanBuild(pos1, node, true)
if nodedef2.walkable then
pos2.y = pos2.y + 1
end
SetNodeIfCanBuild(pos2, node, true)
end
end
-- nächster Punkt durch Vektoraddition
-- next way point
p = vector.add(p, segment_vector)
end
-- End of the corridor; create the final piece
if is_final then
local dug = Cube(p, 1, {name="air"})
if not chaos_mode and not dug then return false, segment_count end
Platform({x=p.x, y=p.y-1, z=p.z}, 1, node_wood)
end
return true, segment_count
end
local function corridor_func(waypoint, coord, sign, up_or_down, up, wood, post, is_final, up_or_down_next, damage)
local segamount = 3
if up_or_down then
segamount = 1
end
if sign then
segamount = 0-segamount
end
local vek = {x=0,y=0,z=0};
local start = table.copy(waypoint)
if coord == "x" then
vek.x=segamount
if up_or_down and up == false then
start.x=start.x+segamount
end
elseif coord == "z" then
vek.z=segamount
if up_or_down and up == false then
start.z=start.z+segamount
end
end
if up_or_down then
if up then
vek.y = 1
else
vek.y = -1
end
end
local segcount = pr:next(4,6)
if up_or_down and up == false then
Cube(waypoint, 1, {name="air"})
end
local corridor_dug, corridor_segments_dug = corridor_part(start, vek, segcount, wood, post, is_final)
local corridor_vek = {x=vek.x*segcount, y=vek.y*segcount, z=vek.z*segcount}
-- nachträglich Schienen legen
-- after this: rails
segamount = 1
if sign then
segamount = 0-segamount
end
if coord == "x" then
vek.x=segamount
elseif coord == "z" then
vek.z=segamount
end
if up_or_down then
if up then
vek.y = 1
else
vek.y = -1
end
end
local chestplace = -1
if corridor_dug and not up_or_down and pr:next() < probability_chest then
chestplace = pr:next(1,segcount+1)
end
local railsegcount
if not chaos_mode and not corridor_dug then
railsegcount = corridor_segments_dug * 3
elseif not up_or_down then
railsegcount = segcount * 3
else
railsegcount = segcount
end
for i=1,railsegcount do
local p = {x=waypoint.x+vek.x*i, y=waypoint.y+vek.y*i-1, z=waypoint.z+vek.z*i}
if (minetest.get_node({x=p.x,y=p.y-1,z=p.z}).name=="air" and minetest.get_node({x=p.x,y=p.y-3,z=p.z}).name~=tsm_railcorridors.nodes.rail) then
p.y = p.y - 1;
if i == chestplace then
chestplace = chestplace + 1
end
end
if IsRailSurface({x=p.x,y=p.y-1,z=p.z}) then
PlaceRail(p, damage)
end
if i == chestplace then
if minetest.get_node({x=p.x+vek.z,y=p.y-1,z=p.z-vek.x}).name == post then
chestplace = chestplace + 1
else
Place_Chest({x=p.x+vek.z,y=p.y,z=p.z-vek.x}, minetest.dir_to_facedir(vek))
end
end
end
local offset = table.copy(corridor_vek)
local final_point = vector.add(waypoint, offset)
if up_or_down then
if up then
offset.y = offset.y - 1
final_point = vector.add(waypoint, offset)
else
offset[coord] = offset[coord] + segamount
final_point = vector.add(waypoint, offset)
if IsRailSurface({x=final_point.x,y=final_point.y-2,z=final_point.z}) then
PlaceRail({x=final_point.x,y=final_point.y-1,z=final_point.z}, damage)
end
end
end
if not corridor_dug then
return false
else
return final_point
end
end
local function start_corridor(waypoint, coord, sign, length, psra, wood, post, damage)
local wp = waypoint
local c = coord
local s = sign
local ud = false -- up or down
local udn = false -- up or down is next
local up
for i=1,length do
local needs_platform
-- Up or down?
if udn then
needs_platform = NeedsPlatform(wp)
if needs_platform then
ud = false
end
ud = true
-- Force direction near the height limits
if wp.y >= height_max - 12 then
up = false
elseif wp.y <= height_min + 12 then
up = true
else
-- Chose random direction in between
up = pr:next(0, 2) < 1
end
else
ud = false
end
-- Update up/down next
if pr:next() < probability_up_or_down and i~=1 and not udn and not needs_platform then
udn = i < length
elseif udn and not needs_platform then
udn = false
end
-- Make corridor / Korridor graben
wp = corridor_func(wp,c,s, ud, up, wood, post, i == length, udn, damage)
if wp == false then return end
-- Verzweigung?
-- Fork?
if pr:next() < probability_fork then
local p = {x=wp.x, y=wp.y, z=wp.z}
start_corridor(wp, c, s, pr:next(way_min,way_max), psra, wood, post, damage)
if c == "x" then c="z" else c="x" end
start_corridor(wp, c, s, pr:next(way_min,way_max), psra, wood, post, damage)
start_corridor(wp, c, not s, pr:next(way_min,way_max), psra, wood, post, damage)
WoodBulk({x=p.x, y=p.y-1, z=p.z}, wood)
WoodBulk({x=p.x, y=p.y, z=p.z}, wood)
WoodBulk({x=p.x, y=p.y+1, z=p.z}, wood)
WoodBulk({x=p.x, y=p.y+2, z=p.z}, wood)
return
end
-- coord und sign verändern
-- randomly change sign and coord
if c=="x" then
c="z"
elseif c=="z" then
c="x"
end;
s = pr:next(0, 2) < 1
end
end
local function place_corridors(main_cave_coords, psra)
--[[ ALWAYS start building in the ground. Prevents corridors starting
in mid-air or in liquids. ]]
if not IsGround(main_cave_coords) then
return
end
-- Determine if this corridor system is “damaged” (some rails removed) and to which extent
local damage = 0
if pr:next() < probability_damage then
damage = pr:next(10, 50)
end
--[[ Starter cube: A big hollow dirt cube from which the corridors will extend.
Corridor generation starts here. ]]
if pr:next(0, 100) < 50 then
Cube(main_cave_coords, 4, {name=tsm_railcorridors.nodes.dirt})
Cube(main_cave_coords, 3, {name="air"})
PlaceRail({x=main_cave_coords.x, y=main_cave_coords.y-3, z=main_cave_coords.z}, damage)
main_cave_coords.y =main_cave_coords.y - 1
else
Cube(main_cave_coords, 3, {name=tsm_railcorridors.nodes.dirt})
Cube(main_cave_coords, 2, {name="air"})
PlaceRail({x=main_cave_coords.x, y=main_cave_coords.y-2, z=main_cave_coords.z}, damage)
end
local xs = pr:next(0, 2) < 1
local zs = pr:next(0, 2) < 1;
-- Select random wood type (found in gameconfig.lua)
local rnd = pr:next(1,1000)
local woodtype = 1
local accumulated_chance = 0
for w=1, #tsm_railcorridors.nodes.corridor_woods do
local woodtable = tsm_railcorridors.nodes.corridor_woods[w]
accumulated_chance = accumulated_chance + woodtable.chance
if accumulated_chance > 1000 then
minetest.log("warning", "[tsm_railcorridors] Warning: Wood chances add up to over 100%!")
break
end
if rnd <= accumulated_chance then
woodtype = w
break
end
end
local wood = tsm_railcorridors.nodes.corridor_woods[woodtype].wood
local post = tsm_railcorridors.nodes.corridor_woods[woodtype].post
start_corridor(main_cave_coords, "x", xs, pr:next(way_min,way_max), psra, wood, post, damage)
start_corridor(main_cave_coords, "z", zs, pr:next(way_min,way_max), psra, wood, post, damage)
-- Auch mal die andere Richtung?
-- Try the other direction?
if pr:next(0, 100) < 70 then
start_corridor(main_cave_coords, "x", not xs, pr:next(way_min,way_max), psra, wood, post, damage)
end
if pr:next(0, 100) < 70 then
start_corridor(main_cave_coords, "z", not zs, pr:next(way_min,way_max), psra, wood, post, damage)
end
end
minetest.register_on_generated(function(minp, maxp, blockseed)
InitRandomizer(blockseed)
if minp.y < height_max and maxp.y > height_min and pr:next() < probability_railcaves_in_chunk then
-- Get semi-random height in chunk
local buffer = 4
local y = pr:next(minp.y, maxp.y)
y = math.floor(math.max(height_min + buffer, math.min(height_max - buffer, y)))
local p = {x=minp.x+(maxp.x-minp.x)/2, y=y, z=minp.z+(maxp.z-minp.z)/2}
-- Haupthöhle und alle weiteren
-- Corridors; starting with main cave out of dirt
place_corridors(p, pr)
end
end)